Have you ever wondered why your Ring Doorbell is flashing blue? Well, you are not alone as many people are experiencing this phenomenon with their smart doorbells. There could be a number of reasons why your Ring Doorbell is blinking blue. Each of these reasons indicates a specific feature or state of the device.
A common reason for a flashing blue light is that your Ring Doorbell is trying to connect to your home WiFi network. This usually happens during the initial setup process or when the device loses connection and needs to reconnect. Another possibility is that your doorbell has gone through an automatic firmware update or has rebooted due to a loss of connection. It's important to understand these different scenarios in order to troubleshoot and make sure your Ring Doorbell is working properly.
Please note that a flashing blue Ring Doorbell does not always indicate a problem. It can also indicate normal operation, e.g. B. the charging process, successful installation or by pressing the button on the front of the device. Armed with this knowledge, you can confidently assess the condition of your doorbell and troubleshoot any issues.
table of Contents
Ring the bell and the blue light flashes
Your Ring Doorbell has a blue light that gives you various visual cues about the device's status. This section will help you understand the meaning of the different types of blue light: steady blue light, flashing blue light, and rotating blue light.
solid blue light
If your Ring Doorbell shows a solid blue light, it means the device is charging. This happens when a battery powered model is connected and the circular light comes on, indicating longer battery life. Once the battery is fully charged, the light will be solid blue. For removable battery models, you can charge the battery externally.
flashing blue light
A flashing blue light can mean several things:
- During setup, this indicates that your Ring Doorbell is connecting to a network.
- After a successful installation, this means the device is working properly and may display a flashing blue light when the front panel button is pressed.
- In some cases, a blinking blue light will indicate a reboot or automatic firmware update, which is not uncommon for Ring devices from time to time, such as when the connection drops.
rotating blue light
If you see a rotating blue light on your Ring Doorbell, it's a sign that the camera is starting to work. This light pattern can occur when the camera is triggered, either by pressing the doorbell button or by a motion triggered event. Be sure to pay attention to the rotation pattern of the light, as it can provide additional information about the status of the camera or any issues that need to be resolved.
Ring Doorbell Connection and Network Issues
If your Ring Doorbell is flashing blue, it may indicate connectivity and network issues. To address these issues, you need to address two main areas: Wi-Fi connection and Internet connection.
WiFi connection
Your Ring Doorbell uses a Wi-Fi connection to work and communicate with the Ring app. A blinking blue light may indicate that it is trying to connect to your Wi-Fi network. Make sure your Ring device is close enough to the WiFi router to maintain a strong signal. You can check the signal strength by following the steps below:
- Open the Ring app on your device.
- Tap the menu and select Devices.
- Select the Ring Doorbell you want to test.
- Touch the Device Status tile.
- In the Network section, scroll down to Signal Strength.
If the signal strength is weak, consider moving your router closer or using a WiFi extender to improve the connection.
If you notice the top half of the blue light flashing during the setup process, it may mean that you entered the wrong WiFi password. Enter the correct password again to connect.
Internet connection
In addition to WiFi issues, your Ring Doorbell may also have internet connection issues. A stable internet connection is essential for your doorbell to work properly. Follow these steps to make sure your Internet connection is working:
- Check other connected devices in your home. If you have similar problems, please contact your Internet Service Provider (ISP) to resolve them.
- If only your Ring Doorbell is having connection issues, restart your device and try connecting to the WiFi network again.
- Update your router's firmware, as outdated firmware can cause compatibility issues and affect connectivity.
By troubleshooting Wi-Fi and Internet connection issues, you can ensure that your Ring Doorbell is working properly and minimize flashing blue lights.
Ring Doorbell Troubleshooting
If you're having trouble with your Ring Doorbell, it's important to know how to effectively fix the problem. In this section, we cover some common troubleshooting techniques to help you fix your blinking blue light issue.
reset your device
If your Ring Doorbell is flashing blue, there may be a problem with the device that needs to be reset. Follow these steps to perform a factory reset:
- Locate the reset button on your device.
- Press and hold the reset button for 15 seconds.
- Release the button and wait for your device to reboot.
- Once the reset is complete, set up your device with the Ring app.
Performing a factory reset will restore your device to its default settings and may fix the blue light flickering issue.
charge and battery
If your Ring Doorbell is running on battery power, a blinking blue light may indicate that the battery is low. To ensure proper operation, please check your device's battery status in the Ring app under Device Status. When the battery is low, you can follow the steps below to charge or replace the battery:
- Remove the device from the mounting location.
- Charge the battery with the supplied charging cable.
- Wait for the light to turn green, indicating that the battery is fully charged.
- Reinstall the device and check the Ring app to make sure the battery level is good enough.
If your device is plugged in, check the voltage in the Ring app and make sure it's enough for the device to work properly.
Update and install
A blinking blue light can also indicate an update or installation problem. Your Ring Doorbell may automatically reboot during a firmware update or if the connection is temporarily lost. If your doorbell keeps resetting, try the following:
- Make sure your device is properly installed, including wiring and mounting.
- Make sure the WiFi password entered into the Ring app during the setup process is correct.
- Make sure your device is connected to a 2.4GHz WiFi network as Ring Doorbells are not compatible with 5GHz networks.
By troubleshooting the update and installation, you should be able to fix the flashing blue light issue and enjoy a smooth working Ring Doorbell system.
Understanding other doorbell light patterns
In addition to the blinking blue light on your Ring Doorbell, you may experience various light patterns that indicate different states of your device. Let's take a closer look at some of these patterns and what they mean to better understand your Ring Doorbell.
rotating white light
A rotating white light on your Ring Doorbell indicates that it's in setup mode, waiting to join or connect to your home WiFi network. If you are not configuring the device, you can exit this mode by holding the side button until the light turns off.
red light pattern
Red lights can appear on your Ring Doorbell for a variety of reasons. Some common red light patterns and their meanings are:
| bright pattern | that means |
|---|---|
| steady red | When your device is recording or streaming live, the red light will remain solid. |
| flashing red light | A flashing red light indicates that the battery is low or the voltage is low. Check the device's battery or wiring and make sure it is getting enough power. |
If you continue to have red light issues, please contact Ring Customer Service for assistance.
Other light combinations
Your Ring Doorbell can also display other light combinations, such as:
| bright pattern | Meaning |
|---|---|
| rising blue light | This pattern indicates that your Ring Doorbell is rebooting, usually after a firmware update or power outage. Once the process is complete, normal operation should resume. |
| Flashing or pulsing blue light | If the blue light on your device is blinking, it could mean that it is connecting to your WiFi network, has a temporary connection, or is receiving a software update. |
In most cases, these light patterns are part of the normal operation of the Ring Doorbell. However, if you are experiencing persistent issues, you can try to reset your device by pressing and holding the side button for 20 seconds. If problems persist, please contact Ring Customer Service for assistance.
Ring Doorbell models and their differences
In this section, you will learn about the different Ring Doorbell models and their differences so that you can choose the best option for your needs. We cover the Ring Video Doorbell, Ring Doorbell Pro, Ring Doorbell Camera, and Peephole Cam models.
Modelos de Ring Video Doorbell
The Ring Video Doorbell line includes several models, such as the Ring Video Doorbell (1st and 2nd generation), Ring Video Doorbell 3, and Ring Video Doorbell 4. All offer basic smart doorbell features such as video recording, two-way communication, and motion detection on doorbells. Newer models have improved video quality, additional security features, and improved connectivity. Here are some key differences:
- Ring Video Doorbell (1st and 2nd generation):These basic models offer 720p and 1080p video quality respectively. They are battery operated and have basic motion detection capabilities.
- Ring Video Doorbell 3:This upgraded model offers 1080p video quality, adjustable motion detection zones, and dual-band (2.4GHz and 5GHz) WiFi support.
- Ring Video Doorbell 4:The latest model includes all the features of the Ring Video Doorbell 3, plus advanced motion detection and color pre-roll (a 4-second video preview before motion is detected).
Ring Doorbell Pro
Ring Doorbell Pro is an advanced option that requires a wired connection to your existing doorbell system. This model offers 1080p video quality and advanced motion detection capabilities, including customizable motion zones and video analytics. With its streamlined design and customizable faceplates, the Ring Doorbell Pro adds an aesthetic touch to your entryway and offers enhanced security features.
camera doorbell and peephole ring
In addition to the traditional ring patterns, Ring also offers some unique options:
- Doorbell Camera:Also known as the Ring Video Doorbell Elite, this model is a professional doorbell camera with 1080p video quality and Power over Ethernet (PoE) connectivity. It has advanced motion detection capabilities, better night vision capabilities, and a flush mount design.
- gucklock camera:Specially designed for peephole doors, this device offers 1080p video quality and shock detection. It's a great option for apartment dwellers or people who can't trade in their doors for a traditional smart doorbell.
As you weigh your options, keep in mind that all Ring doorbells integrate with Ring Chime devices and other Ring cameras in your home for a more complete security system.
Ring Doorbell Advanced Features
Your Ring Doorbell has several advanced features. These features can help you monitor and secure your home more effectively.
Live audio and video streaming
An important feature of your Ring Doorbell is the ability to stream live video and audio. So you can see and hear what's going on outside your door, even when you're not home. Your Ring Doorbell's camera is capable of recording high-quality video, and the quality of the audio stream from the device is crisp and clear. You can access these features through the Ring app, making it easy to stay connected to the safety of your home.
Smart home automation systems
Ring Doorbell integrates with multiple smart home automation systems, allowing you to control your doorbell along with other devices in your home. This includes compatibility with Amazon Alexa, Google Assistant, and other popular smart home platforms. By connecting your Ring Doorbell to these systems, you can create seamless security solutions and monitor multiple aspects of your home at once.
Security and night vision integrations
Ring Doorbell is equipped with night vision capabilities, allowing the camera to work effectively even in low light conditions. This ensures that you have a clear view of the outside of your home even during night hours. Ring Doorbell also integrates with various home security systems, increasing its potential as an integral part of your overall security setup.
To keep your Ring Doorbell working at its best, it's important to monitor its performance and fix any problems. If you notice your doorbell flashing blue, please contact Ring Support and review the help articles for possible causes and solutions.
Additional Tips and Support for Ring Doorbell
As a Ring Video Doorbell user, there are some important resources and information that you should be aware of. They help you get the most out of your smart doorbell and can be helpful in troubleshooting LED lighting or other features.
Dealing with common mistakes
Errors may occur during the installation process or while using the device. For example, night vision can be affected by things like storms or changes in the environment. To fix common problems:
- Always read your Ring Doorbell manual.
- Check for firmware updates in the Ring app as these should fix most issues.
- Reboot your device if it gets stuck at startup or encounters other issues that affect normal functionality.
understand status messages
Status notifications, like the blinking blue LED on your Ring Video Doorbell, communicate important information. For example:
| Condition | Description |
|---|---|
| flashing blue light | An attempt was made to connect to WiFi or an incorrect password was entered during installation. |
| flashing light pattern | According to the ring model; For more information, see the Ring user guide or app. |
Pay attention to these LED light patterns as they serve as indicators of your device's operation and can help you spot any issues more quickly.
Contact Customer Service
If you can't resolve a problem yourself, Ring Customer Service is here to help. Contact:
- Through the Ring app via live chat.
- By calling the support hotline (you can find the correct number in the app or on the website).
- On social media platforms where they can respond to customer inquiries.
Remember that the information provided through these channels can be invaluable in keeping your Ring Video Doorbell working properly and allowing for easy installation and maintenance.
FAQs
Why is my Ring Doorbell flashing blue? - Smart home technology? ›
The most common reason a Ring Doorbell is flashing blue (1 second on, 1 second off) is because it is starting or booting. This should stop after about a minute.
What does blue light on Ring camera mean? ›Blue light with slow blinking pattern. Camera is starting up. Solid blue light. Firmware update in progress.
Why is my Ring Doorbell just flashing blue? ›If you've just installed a Ring Video Doorbell Pro and now there's a blue LED blinking and a slowly filling-in the circle on the front of the Ring Video Doorbell Pro, the blue circle you see on the front of your Ring Pro is a charging meter.
Why is my Ring Doorbell Chime flashing blue and not connecting? ›You can try unplugging the Chime Pro and plugging it into another nearby outlet. You can also hold down the reset button on the side of the Chime Pro for 10 seconds and release it to power cycle the Chime Pro.
What do flashing lights on Ring Doorbell mean? ›White light flashing on the top - incorrect password - passwords are case sensitive and have no spaces. White light flashing left - failed setup for a reason other than incorrect password or Ring network access point. doorbell is updating internally. Solid white light - doorbell is idle.
What does the blue light mean? ›/ˌbluːˈlaɪt/ to take someone to a hospital in an emergency vehicle using blue flashing lights: Patients with a suspected stroke should be blue-lighted to the nearest hospital. SMART Vocabulary: related words and phrases.
What color should the light be on my Ring Doorbell? ›| Activity | Flashing Light Pattern |
|---|---|
| Booting up | Blue circle is flashing, one second on, one second off |
| Speaker enabled | Solid blue light |
| Successful set up. | Four LEDS flash four times |
| Setup failed - password error (passwords are case sensitive) | Flashing white light at the top of the circle |
The green, amber, and red colors are indicators of your device connection. Green is good, red is poor. Learn more about fixing connection issues. Reboot your Ring Doorbell or Camera in the Ring app. In order to reboot your Ring device, it must be connected to wifi.
What does blue light LED mean? ›Blue LED light treatment uses blue light emitting diodes to kill acne-causing bacteria on the skin. It also emits a near infra-red that has cell regenerative effects that can improve your complexion.
What do different light colors mean? ›Red: Anger, intensity, passion, active. Orange: Exciting, unique, disturbed, warm. Yellow: Cheerful, stimulating, serene. Green: Fresh, natural, wealth, youthful. Blue: Cool, sad, social, dignified.
What are some facts about blue light? ›
Blue light has a wavelength of between approximately 380nm and 500nm which makes it the shortest, highest-energy wavelength. It can be harmful because it is the brightest visible light that most people are exposed to for long periods of time.
Does a Ring Doorbell have a reset button? ›Performing a hard reset
To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting.
Top reasons why Video Doorbell Pro may be offline
Your wired Ring device may not be receiving power, is unplugged, or the power is out. Your location's internet may not be working, or your internet service provider is experiencing high traffic.
Another way to turn off the blue light on a Ring Doorbell is by pressing the reset button. Use a SIM card eject tool, pin or paperclip to press and hold the reset button for 30 seconds. After 30 seconds, release the button and wait another 10 seconds. The Ring Doorbell should restart and turn off the blue light.
Why won t my Ring doorbell connect to wifi? ›Check the battery or power on your Ring doorbell
If your device still won't connect to Wi-Fi, the issue may be your power source. If you have a wireless Ring device, check the battery level. If it's low, you'll need to charge the battery for your Ring doorbell to connect to Wi-Fi.
Whenever network connection in lost, your Ring device(s) will automatically reconnect once the same network is available again.
What happens if Ring doorbell loses wi-fi connection? ›What Happens To Your Ring Doorbells and Cameras When The Wi-Fi Is Off? Essentially – nothing! Without access to the internet in some form or fashion, Ring Doorbells and Cameras cannot detect nor record motion. Your Ring doorbell may still ring – but it will only be heard outside from the actual device.
Should my Ring Doorbell have a blue light? ›The blue light on your Video Doorbell should only show when answering an event, or engaging in a live event, in the Ring app. Another reason a blue light might be noticed is when you are reconnecting to the network, or during connection step when setting up your Doorbell.
What mode should you keep your Ring Doorbell on? ›By default, in Home Mode, indoor cameras do not detect motion or provide Live View, but outdoor cameras remain fully active. Away mode is designed to monitor your whole home, inside and out. Select this mode when you leave home to activate Ring Doorbells, Cams and Alarm.
What setting should my ring light be on? ›The three settings are: Low: Try this setting if the light is turning on too often. Medium: The default setting, which is ideal for most setups. High: Monitor the largest possible area with the most sensitivity.
Why is my Blink doorbell flashing? ›
The Blink Video Doorbell flashes a red LED on the ring surrounding the doorbell button when it is seeking connection. During setup, and change of system or Wi-Fi, the red LED shows if the doorbell is ready to connect.
How does a flashing doorbell work? ›Light Doorbells
These doorbells are either activated by a doorbell button or a door knock alert system. With a door knock alert system, when someone knocks on the door a vibration sensor unit detects the vibration caused by the knocking and thus signals a bright light to flash.
Make sure that your 2.4 GHz Wi-Fi is powered on and functioning. The Blink doorbell requires a 2.4 GHz Wi-Fi network with minimum 2 MB/sec upload speed. Make sure the doorbell has fresh batteries. If your doorbell is connected to powered wiring,you may need to turn power back on at the breaker.
What color does the Ring camera turn when someone is watching? ›The normally white LED ring around the button turns blue indicating that the camera is active AND someone is watching it.
How do you know if someone is watching Ring camera? ›Can you tell if someone is watching you on Ring? If you see the infrared light turn on at night while the security camera is in Disarm Mode, someone else may be viewing your live feed. Change your router's password and ensure that video encryption is enabled on your Ring Camera.
How do you know if a Ring camera is recording? ›Ring's cameras and doorbells show a light on the front when they record or if someone's watching a live view—they also send motion alerts to your phone. You need to pay for a Ring camera storage plan to record video.
Does the blue light on Ring stay on? ›The blue light on a Ring should not stay on once the live event is over and you're not using the app. If this occurs, you can manually turn the light off by resetting the device.
Can someone hack into my Ring camera? ›Without the proper security measures in place, Ring cameras can be hacked. A general rule of thumb when it comes to device security: if it can connect to the internet, it can be hacked. A Ring doorbell hack or exploit, when found by a hacker, will typically be shared online with other cybercriminals.
Can someone disable my Ring camera? ›Only the owner of a Ring device can deactivate it. You won't be able to control or change any of the device settings after your device is deactivated. Your videos are stored in the cloud only with a Ring Protect Plan, and the storage time may vary based on your Video Storage Time settings.
Does Ring Doorbell light up when motion is detected? ›When your Ring Doorbell senses motion, it will not make a sound nor will the lights turn on/activate. If you choose to 'accept' a motion alert, the LED ring will light up blue. At that point you'll be able to speak and hear through the Ring as well as view the live video stream.
Can I cover the blue light on my Ring cam? ›
CAMASKER covers your Ring Cam and turns it into a plant decoration. Also includes a sticker pack that can be used to hide that annoying BLUE LED Light on your indoor/outdoor security camera. CAMASKER is the #1 Way to decorate & cover your Ring Stick Up Camera.
What triggers a Ring camera to record? ›If you do have a Ring Protect Plan (including a trial), Ring records and stores videos when motion is detected by your device (including devices linked to cameras such as an alarm system's motion detector), the video doorbell button is pressed, or you initiate your device's live video stream (Live View).
Can a Ring Doorbell hear conversations? ›Can a Ring Doorbell hear conversations? Yes, it can but only to a certain distance. Some Ring Doorbells can capture audio up to 3 feet.
How far away does Ring detect motion? ›How far out does motion detection go? Motion detection on video doorbells can detect motion up to 30 feet from the camera. For enhanced motion detection, make sure you have the latest version of the Ring app downloaded on your iOS or Android.
Why is the blue light flashing on my security camera? ›A blinking blue light indicates that the camera has lost connection to the Internet and is trying to reconnect. A red light indicates that the camera has been factory reset and is in pairing mode. Was this article helpful?